PS1 Games to PC Configuration Guide:
Hai Everyone
This is My Games. Everyone wants some entertainment .You Found it here too.
Now your PC become a Multi-Playstation System which u can play awesome games including PS1 & PS2
Using Its Console [ Playstation ] Software Known as “ EMULATOR “
PS1 GAMES
Are u Ready to play Need For Speed 4 High Stakes ?
Minimum System Requirements to play PS1 games:
HardWare Requirements:
OS Name: Microsoft Windows 7 / Microsoft Windows XP / WindowsVista .
Processor: Intel Pentium(R) Dual-Core 2.30GHz/AMD /others
RAM : 1GB to 2GB
Software Requirements :
1.Download “ PSX Emulators.rar “ [(psx v1.13) & (ePsxe v1.6.0 Recommended)]
2.Download “ dll files.rar “.
Note:To Open .rar files U need " Winrar Archiver " Download “ PC Archieves “ below
Main Step : Extract “ dll files.rar “ as detailed in “readme.txt “ .
Configuration Guide ePSXe v1.6.0
Follow Step by Step Image view procedure
Step 1: Right Click on PSX Emulators & click on “ Extract Here “
Step 2:After Extraction Open Folder “ ePsxe Emulator “
Step 3: Inside Open Folder “ ePsxev1.6 “
Step 4:select “ ePSXe.exe “ and Create a Desktop Shortcut
Step 5: Open “ ePSXe.exe “ shortcut from desktop
Step 6: The Window appears like this. Click on “ Config “ and then “ Wizard Guide “
Step 7: Click on “ Config>> “
Step 8: Select “ scph1001 – USA (Recommended) “ and then Click “ Next>> “
Step 9: Wait for 5 Seconds
Scroll Down and Select “ P.E.Op.S. Soft Driver 1.15 “ and then Click “ Config “ .
Step 10: Check all the settings from below image is same as yours, if not change it and then click “ OK “ .
Step 11: After above settings Click “ Next “
Step 12: Select “ ePSXe SPU core 1.5.2. “ and then Click “ Next >> “
Step 13: Select “ ePSXe CDR WNT / W2K core 1.5.2. “ and then Click “ Next>> ”.
Step 14: Click on “ Controller 1 “ .
Step 15: Below Image Shows System Default settings Keyboard as controller . If You Dont Have a Controller Just goto Step 17
Step 16: Do you Have a PC controller ?
.jpg)
.jpg)
Assign controller Buttons to related ones as shown below
Click on “ E “ , At the Bottom of window it Clearly Shows “ EDIT BUTTON: L2 “
Searching for Button “ L2 “ Just Look Above Image and Press “ L2 “ on your Controller then
“ E “ change into “ L2 “ as “ J1_B7 “ (means Joystick -1 Button-7)
Similarly for
“ W “ à “ L1 “ as “ J1_B5 “
“ T “ à “ R1 “ as “ J1_B8 “
“ R “ à “ R2 “ as “ J1_B6 “
“ D “ à “ TRIANGLE “ as “ J1_B1 “
“ X “ à “ CIRCLE “ as “ J1_B2 “
“ Z “ à “ X “ as “ J1_B3 “
“ S “ à “ SQUARE “ as “ J1_B4 ”
“ Q “ à “ L3 “ as “ J1_B11 “
“ Y “ à “ R3 “ as “ J1_B12 “
“ C “ à “ SELECT “ as “ J1_B9 “
“ V “ à “ START “ as “ J1_B10 “
Leave the Bottom 4-LEFT Analog Stick & RIGHT Analog Stick settings as Default settings.
Any doubts Look Above Image
D-PAD Settings :
“ UP “ à “ UP “ as “ POV1_UP “
“LEFT “ à “ LEFT “ as “ POV1_LEFT “
“ DOWN “ à “ DOWN “ as “ POV1_DOWN “
“ RIGHT “ à “ RIGHT “ as “ POV1_RIGHT “
If You Want to Play With LEFT Analog Stick
Click on “ UP “ on Window then Move Left Analog Stick to UP the Key Changes to “ J1_UP “
Similarly for
“ LEFT “ à Move Left Analog Stick to LEFT the Key Changes to “ J1_LEFT “
“ DOWN “ à Move Left Analog Stick to DOWN the Key Changes to “ J1_DOWN “
“ RIGHT “ à Move Left Analog Stick to RIGHT the Key Changes to “ J1_RIGHT “
Below Image is the Complete Button Config Using PC Controller
After Click “ OK “ as shown in Image. Then Directly goto Step 18 .
Note : ANALOG STICKS work Only When a Red Light is ON on Controller ,
Otherwise They Work As
Step 17: Click “ OK “ (Image With Keyboard as Controller )
All Settings are Completed
Step 18: If U have Downloaded any of CD Images Extract them
.jpg)
Extracted Files are Shown in below image
.jpg)
Open “ File “ menu Then Click “ Run ISO “
Step Final: Select a Game Iso Image And Click “ Open “.
ENJOY Playing PS1 GAMES On PC
No comments:
Post a Comment